The final choice if you are replacing odd sized drawer knobs is to buy ones with a back plate. A back plate can cover the existing holes. No one will know they are there. It will eliminate the problem inherent in the other option where you have to match the finish of the holes to the drawer front. Many drawer pulls come with back plates. You can search the home improvement stores and hardware stores looking for that ideal set of cabinet handles. It takes a lot of leg work, but you get a first hand look at any hardware you are considering. If it is a local store, you are likely to know how good their return policies are, as well.
To choose drawer knobs that will fit the holes that have already been drilled for previous hardware, it is essential to do some measuring. Take off the old drawer pull and measure from the center of one screw hole to the center of the other. A three-inch distance is quite common and it will be easy to find a replacement.
If you find that your center-to-center measurement is an odd size, you have three choices. You can search until you find the odd size of drawer pulls to match your drawers. This is usually not the best option unless you have a lot of time. It can take months or even years. The second choice is to fill the original holes with wood putty, finish over them, and make new holes.
Robin Brunelle Kitchen Drawer Sunday July 07th, 2019 05:49:10 AM
Hit One of The Thumbnails Below to Get More Kitchen Drawer Ideas
Sunday July 07th, 2019 05:49:10 AM